Dispensing Equipment

TITLE:

High Flow Dispenser

PURPOSE:

To have a fully self-contained dispensing system with high performance that can be transferred from chassis to chassis, quickly and easily.

These designs are the benchmark in design efficiency and quality and have become accepted as standard on mobile dispensing applications.

The units are easy to use, quiet, lightweight, have very low maintenance and are capable of meeting individual needs.

The High Flow Dispensers are also NSC Approved.

OPERATION:

A hydraulic control valve is mounted next to the hosereel. The lever locks forward to drive the pump or will rewind the hosereel when pushed backwards and has spring return (deadman action). The operator can select his desired rewind speed with a separate flow control valve mounted to the reel.

The air eliminator discharge port has a special tank fitted that collects any product that may spray from the unit and will automatically drain this product back into the pump when a predetermined level is reached, this prevents staining the ground during pumping and recycles fuel which is normally wasted.

As an option, the dispensers can be supplied with EMH500 or EMH600 electronic registers which are solid state & extremely reliable.

ADJUSTMENT OR SERVICE:

Pump has an optional air control valve on the bypass pressure. The flow rate through the pump, can be adjusted by changing the bypass pressure.

Clean the air eliminator filter monthly and empty air eliminator tank as required.

MOUNTING:

Mount using 6 off M12 or ½" high tensile bolts.

The only connection to make is two hydraulic hoses on fittings provided (1/2" BSP typical).

WEIGHT:

HFD300 = 190kg (dry weight based on 38mm hose)
HFD450 = 205kg (dry weight based on 38mm hose)
HFD600 = 225kg (dry weight based on 38mm hose)

OPTIONS:

TECHNICAL DATA:

Normal flow rate through a 1 ¼" nozzle & hose is around 250lpm. Using a 1 ½" nozzle, it is possible to get up to 340lpm when using a HFD300 with a 38mm hose.

Dimensions:

* Note: reservoir tank for air eliminator can be mounted to the side or rear of the hose reel assembly. See follow drawing.

ASSOCIATED EQUIPMENT:

NOTE: Hose and Nozzle are supplied separately.
AVN040 & AVN041 nozzles.
LBV4-V butterfly valve
EMH600 Electronic register

TITLE:

LTE3X3 - Aluminium elbow 80mm male camlock x 80mm titefill elbow.
LTE3X4 - Aluminium elbow 80mm male camlock x 100mm titefill elbow.
LTE4X4 - Aluminium elbow 100mm male camlock x 100mm titefill elbow.

PURPOSE:

This elbow is used to connect discharge hoses from roadtankers to fill underground storage tanks fitted with titefill adaptors LTA4X4 and LTA4X3.

OPERATION:

The elbow is clipped onto a LTA adaptor fitted to the fill line of an underground storage tank. One end of the flexible hose is then connected to the inlet of the elbow and the other to the road tanker. Flow can be observed through the inbuilt sight glass. Sealing by lip seal on the side of the titefill adaptor as this surface is very rarely damaged or worn.

PERIODIC SERVICE:

No set period. Service as required.
If the seal is damaged or worn no disassembly is required just remove and replace.

VARIANTS:

LTE3X3, LTE3X4, LTE4X4, VTE 3
Difference between LTE4X4 and LTE3X4 is male camlock adaptor inlet can be either 80mm or 100mm.

MATERIALS OF CONSTRUCTION:

Aluminium body
Low-swell high acrylonitrile seal
Acrylic sightglass

MOUNTING:

Hand mounted push & click with quick release clip-levers.

WEIGHT:

3.9kg

TECHNICAL DATA:

100mm bore all through for minimum pressure drop.
LTE4X4 style is fitted with a 100mm male camlock on the inlet end.
LTE3X4 style is fitted with a 80mm male camlock on the inlet end

TITLE:

In line strainer for 76mm and 102mm diameter flow.

PURPOSE:

Lightweight inexpensive aluminium suction line strainer for larger pumps such as those fitted to large vehicles and prime movers for bulk industrial deliveries.

OPERATION:

Protects down stream equipment such as meters and pumps from debris and foreign objects. Strainer basket can only be fitted for correct direction of flow. Drain bosses provided in body and lid to suit any mounting angle.

DISMANTLE:

Simply remove lid by unscrewing 2 off lid retaining nuts and remove basket.

ADJUSTMENT:

None

TECHNICAL: DATA

Maximum vacuum to 90kPa.
Maximum working pressure to 700kPa

MATERIALS:

metal construction. Cast aluminium body & lid.
Steel mesh with aluminium surround, see page 3.
Nitrile seal.
Available to aviation standard on special order.

MOUNTING:

4" TTMA flanges.
Mount with arrow in correct flow direction.

WEIGHT:

4.7kg

ASSOCIATED EQUIPMENT:

LBV400 butterfly valve.
BF4-SG-40, BF4-SG-25, sight glasses.

Description

Sightglass strainer enables quick and convenient inspection of the basket for particles and objects, and shows the colour of the liquid for identification. Also allows confirmation of empty before hose disconnection.
Assembly incorporates 80mm suction camlock. Basket is zinc plated steel, 1500 micron. Flow area through mesh is equivalent to 70mm diameter.

TITLE:

High pressure hose reel suitable for petroleum products.

PURPOSE:

The HP series of hose reels are a generation of reels for high pressure use and available with hand or hydraulic rewind and in different sizes. The HR150 has incorporated all the HP hosereel style features into the old style HR6. It has the same robust construction - stiffened cheek plates, extremely sturdy thick wall manifold with added strength from steel inner drum, steel base frame and self aligning bearing. Flow area is equal to 38mm throughout. Sealing is by lip seal and all models incorporate an optional lock. Ball bearings look after rotation, with end thrust being taken care of by heavy duty circlips and thrust washers. All components are easily replaced and manifold rubbing surfaces are nickel plated for long life.

The HR150-LM replaces the old style HR6-LM cartwheel with aluminium cheekplates.

OPERATION:

Just un-hook nozzle and dispense hose to the required location. To rewind the hose a hydraulic motor is used. The hose nozzle storage can be fitted with interlocks to help prevent drive away accidents and product spills.

PERIODIC SERVICE:

Quarterly grease plumber block bearing.

VARIANTS:

Hose size - 25mm, 32mm, 38mm diameter.

MOUNTING:

4 x M10 bolts - see mounting footprint on following page

TECHNICAL DATA:

Pressure tested & rated to 2100kPa

ASSOCIATED EQUIPMENT:

HR150-LM standard model without motor.
Aviation drum style hose reel: AHR250D
Cartwheel type hosereels: AHR250
Nozzles - AVN040
Nickel plated steel gooseneck with st steel inlet flange available
Nickel plated gooseneck with 1 ¼" MBSPP thread available for aviation and water use.
Rollers and guides.

OPTION:

Hot dip galvanised version.
1 ½" N/P FBSP entry flange.
LPG version

MATERIALS OF CONSTRUCTION:

Aluminium cheekplates, Mild steel drum & SG iron manifold.
Polyurethane seals. Nitrile as option.